Products
 
 
 
 
    Non asbestos gland
   
  COATINGS  
   
 
GREASES & PASTES
  High Performance Epoxy    
 
High Build, direct-to-metal, epoxy coating system designed to provide corrosion protection on sound rusted metal with minimal surface preparation. Two component single coat system provides the wear and abrasion resistance of multi-coat epoxy coating. Long term corrosion protection and good compatibility with existing coating which cannot be removed. Good gloss retention like polyurethane systems.
RECOMMANDED APPLICATIONS
» Coating on steel pipe lines, chimneys etc.
» Coating on steel structures like reaction vessels, exhaust fans, tanks.
»` Coating of off-shore and marine structures.
» Coating on mudguards and various automobile parts.
» Demarcation lines on industrial floors.
» Non absorbent protection coating for floors subjected to oil spills.
» ETP tank & Structure Coating .
» Equipments internal Coating like pump casings, heat exchanger etc.

CHEMICAL RESISTANCE
7 days Room Temperature cure (30 Days)
Ammonia Solution 10% Excellent
Brine Solution Very Good
Chlorinated Solvent Good
Hydrochloric Acid, 10% Very Good
Hydrochloric Acid, 33% Fair
Kerosene Very Good
Sodium Hydroxide Excellent
Sulphuric Acid, 10% Very Good
Salt Solution Saturated Very Good
 
 
 
TYPICAL PROPERTIES
Mixing ratio  
Resin : Hardener By Vol. 2.5:1
Specific Volume cc/kg. 770
Pot life at 25 C in minutes 60
Operating temperature C 121
Cure time in hours 16
Coverage sq. mt/ 5 liters. 20@ 0.25mm
Colour All Major Colour.
   
AMANA INDUSTRIES
18/B2,
CHANDRAMUKHI LOK SURBHI CHS LTD.
CHANDRAMUKHI LOK SURBHI COMPLEX,
NEAR PATRIPOOL, KALYAN (W) 421 301.
Tel Fax. 0251 2300534/3255851

Email:sales@amanaind.com
Website : amanaind.com

HC 342 SPEEDY DRY COATING (5 LTRS.)
Water-Based, fast drying poly urethane coating
formulated for application where down time is critical.
Can be applied over HC 351 & HC 360. Dries tack
free in 15-30 minutes. Coverage 60 sq. Mtr per unit
@ 40 micron dft. Colour - All major Colours.
 
 Next